Home Automation RC-120 User Manual

O M N I S T A TELECTRONIC COMMUNICATING THERMOSTATOwner's ManualRC-120 Two Stage Heat/Cool2 Stage Heat / 2 Stage CoolDocumen

FILTER REMINDERYour thermostat logs the amount of time your heating and coolingsystem has been running and gives you a reminder when it's time to

SETTING THE CURRENT TIME AND DAYTo set or change the current time and day, press and release the Progkey. The hour will blink.1. Use the arrow keys (

PROGRAMMINGYour thermostat may be programmed to adjust the heating andcooling settings up to 4 times per day (MORN, DAY, EVE, NITE).You can setup a te

SETTING TIME SCHEDULESTo view or change the programming time schedules of yourthermostat, press and the Prog key four times. The weekday MORNtime wil

6. Press the Prog key to advance to the next period. 10

Repeat steps 1-6 for the DAY, EVE, and NITE periods. Afterwards,repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4daily periods on Sund

SYSTEM MODEYour thermostat can be connected to an automation system orpersonal computer. With network software, the remote system cansend commands to

TIME SCHEDULESThe table below shows the time schedules that are currently set intoyour thermostat. There is a blank table at the bottom that can beus

COOLHEAT

TWO YEAR LIMITED WARRANTYHome Automation, Inc. (HAI), warrants this product against defects inmaterial and workmanship, under normal use and service,

Copyright © 1997 Home Automation, Inc.All Rights Reserved

CONTENTSINTRODUCTION...1DESCRIPTION...1MAINTENANCE...1

This thermostat is Listed by Underwriter's Laboratories andUL Canada.This thermostat has been tested and found to comply with therequirements of

INTRODUCTIONThank you for purchasing your new RC-120 electroniccommunicating thermostat. Your thermostat will provide you withcomfort, convenience, a

OPERATIONTo take advantage of all the benefits and features offered by yourthermostat, we recommend that you start by becoming familiar withits operat

4- Mode Press the Mode key to set the thermostat mode to Off, Heat,Cool, or Auto.In Off mode, the heating and cooling systems are both off and donot r

DISPLAYThe following icons will be displayed during normal operation:1- Temperature DisplayShows the current temperature, desired temperature, or heat

5- The Top is displayed when Stage 1 of the heating or coolingsystem is running.The Bottom is displayed when Stage 2 of the heating orcooling syst