Home-automation HOME AUTOMATION User Manual download pdf (Page 38)

HAI RC-Series Thermostats

The following control actions are allowed for HAI Communicating Thermostats:

•

Set heating setpoints

• Set cooling setpoints

• Set system mode (Off / Heat / Cool / Auto)

• Set fan (On / Auto)

• Turn hold On and Off

NOTE: Not all actions are applicable to every type of thermostat.

To enter the temperature menu, from the top-level display or from the main menu, press the 5 (TEMP) key on the console keypad.

You will be prompted with the first named temperature zone (i.e. Upstairs). The temperature zone can be specified by entering

the temperature zone number followed by the ' # ' key, or by pressing the arrow keys to scroll through the list of temperature

zones. Press the ' # ' key when the desired temperature zone is shown.

Press the ' 0 ' key to select all HAI Thermostats. This is a simple way to broadcast the new Heat or Cool setting or change the

system mode, fan mode, or hold mode of all HAI thermostats in your system. Temperature zones 1-4 are for HAI thermostats.

TEMPERATURE:

ENTER TEMP ZONE 0=ALL

↓

After the ' # ' key is pressed, a menu appropriate for the type of temperature zone is shown. For Celsius temperatures, press the

' # ' key prior to entering the temperature to make the number negative. The Celsius temperature may also be specified in 0.5

degree steps, if three numeric digits are entered. The third digit adds a .5 to the first two digits, if it is anything other than zero.

Enter a leading zero, if necessary.

For HAI heat/cool thermostats:

Upstairs

1=MODE 2=HEAT 3=COOL

↓

Upstairs

4=FAN 5=HOLD #=STAT

↑

To change the system mode on a thermostat, press 1 (MODE). A menu presenting options appropriate for that type of thermostat

is then displayed.

For heat/cool thermostats with auto changeover:

Upstairs MODE

0=OFF 1=HEAT 2=COOL

↓

Upstairs MODE

3=AUTO ↑

To change a temperature setting, press 2 (HEAT), 3 (COOL), or 2 (TEMP) as appropriate:

Upstairs HEAT

ENTER TEMPERATURE:

Upstairs COOL

ENTER TEMPERATURE:

Upstairs TEMP

ENTER TEMPERATURE:

Enter the desired temperature then press the ' # ' key.

The fan control on a thermostat may be switched between on and auto by selecting 4 (FAN) from the temperature menu:

Page 30

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Comments to this Manuals

No comments

Home-automation HOME AUTOMATION User Manual Page 38

Comments to this Manuals

Related products and manuals for Furniture Home-automation HOME AUTOMATION