Home-automation HOME AUTOMATION User Manual download pdf (Page 45)

The Zone Status menu allows you to view and scroll through the status of each zone input. To enter the Zone menu, from the

Status menu, press the 2 (ZONE) key on the console keypad. The system will display:

Front Door SECURE

ZONE 1

↓

You may enter a zone number to start displaying the status with zone, or simply press the down arrow key to start with the first

zone. The arrow keys may be used to continue scrolling between zones. For each zone, the display will show the zone name, the

zone number, and the current status of the zone:

3 = SUN (SUNRISE / SUNSET AUTOMATIC CALCULATION)

The system automatically calculates the time of sunrise and sunset each day. From the status menu, press the 3 (SUN) key on the

console keypad to display the calculated time of sunrise, sunset, and the outdoor temperature (if outdoor temp sensor installed):

Sunrise: 6:00 AM Temp

Sunset: 5:58 PM 85

4 = TEST (SYSTEM DIAGNOSTIC TEST)

The diagnostic test performed by the Omni IIe allows you to check the status of the battery, telephone, bell circuit, auxiliary fuse,

and security zone loop readings. The display is updated 3 times per second, although the actual readings are taken 10 times per

second. To enter the Test menu, from the Status menu, press the 4 (TEST) key on the console keypad.

The first display shows the current battery reading and the phone line status. A battery test is initiated when the status mode is

first entered. The new battery reading is updated ten seconds later. The low battery limit is also displayed.

The phone status consists of two parts, separated by a "/". The first part shows the current phone line state:

ONHK - ON HOOK OFFHK - OFF HOOK

RING - RINGING DEAD - DEAD PHONE LINE

The second part shows how the Omni IIe is currently using the phone line:

IDLE - NOT USING THE PHONE LINE

LOCAL - LOCAL ACCESS

REMOTE - REMOTE ACCESS

VOICE - IN VOICE DIAL OUT MODE

EMGACC - ACCESS AFTER VOICE DIAL OUT

DCM - IN DIGITAL COMMUNICATOR MODE

BATTERY: 230 (LIMIT 200)

PHONE: ONHK/IDLE

↓

Next, the display shows the A/D reading for the battery voltage, phone line voltage, AC power on, bell, and fuse:

BAT: 225 PHONE: 140

ACON: 82 BELL: 215 

FUSE: 222



Page 37

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 97 98

No comments

Home-automation HOME AUTOMATION User Manual Page 45